Introduction to the RT Box Videos

Building a Simple PLECS Model on PLECS RT Box 1

This video provides a step-by-step tutorial on building a simple PLECS model on the PLECS RT Box 1.

Configuring Analog Inputs and Outputs on PLECS RT Box 1

Watch this tutorial video to learn how to configure the analog I/O blocks, their voltage ranges, scale and offset parameters, and scope triggers in external mode on the PLECS RT Box 1.

Configuring Digital Inputs and PWM Capture on PLECS RT Box 1

Watch this tutorial video to learn how to configure the Digital In and PWM Capture blocks on the PLECS RT Box 1. For real-time hardware-in-the-loop applications where accurate PWM sampling is required, it is advantageous to use the PWM Capture component. These PWM capture blocks must be used in conjunction with a hybrid switch module.

Configuring Digital and PWM Outputs on PLECS RT Box 1

Watch this tutorial video to learn how to configure the Digital and PWM outputs on the PLECS RT Box 1. The PWM Out block is used in Rapid Control Prototyping applications to generate a configurable PWM signal on an RT Box digital output.

RT Box 1 Installation Support

For support with setting up the RT Box, please watch the tutorial videos given below:

Englisch