This PLECS demo model shows a grid-connected battery charger with cascaded AC/DC and DC/DC converters. The AC/DC converter is regulated by a digital PI controller to achieve power factor correction (PFC) and maintain the DC bus voltage at 300 VDC. The DC/DC converter is designed to provide a maximum 120 VDC output at a power rating of 1.4 kW.
This PLECS demo model shows an isolated DC/DC resonant converter operated under frequency control. The output voltage of the converter is controlled by changing the switching frequency of the semiconductors. Zero-Voltage Switching (ZVS) is used to reduce switching losses, allowing the operation of the converter at higher switching frequencies.
The doubly-fed induction generator (DFIG) system is a popular system in which the power electronic interface controls the rotor currents to achieve the variable speed necessary for maximum energy capture in variable winds. Because the power electronics only process the rotor power, typically less than 25% of the overall output power, the DFIG offers the advantages of speed control with reduced cost and power losses. This PLECS demo model demonstrates a grid-connected wind turbine system using all of PLECS' physical modeling domains. The system model includes a mechanical model of the blades, hub, and shaft, a back-to-back converter including thermal loss calculations, a magnetic model of the three-phase transformer, and the transmission line and grid.
This PLECS demo model shows a DC-DC flyback converter operating in discontinuous conduction mode with two outputs. The model combines the electrical power circuit with a special magnetic circuit for the flyback transformer and the discrete controller.